4
b. Slide the nut of the three-way ball valve onto the 3/8" PE pipe pipe and insert
the pipe into the opening of the three-way ball valve. Tighten the nut with a wrench.
c. Install the three-way ball valve on the cold
water valve. Please don’t miss the gasket
inside the three-way ball valve during
installation.
- This product cannot be disposed of with other domestic waste products.
At the end of the product’s service life, it should be returned to the place of
purchase, or at a local recycling center, indicating that it contains electric
and electronic components. The appropriate collection and treatment
of the product, which no longer are to be used, contributes to the
preservation of natural resources and avoids any potential public health risks.
1. Install the three-way ball valve
a. Turn off the cold water supply. Turn on the kitchen cold water faucet to release
the pressure and allow water to drain from the line. Disconnect the cold water
hose from the cold water valve.
Gasket
(1)
(2)
Cold
(1)
(2)
Hot Cold
To Next Page
Loading...
Need help?
General
