12
Enter [3] to enter user record deletion
and enter [3] to enter user ngerprint
deletion, then enter [1] to delete a
single ngerprint.
Enter a 2-digit code (user code:00-99)
to be deleted and conrm with[#]. After
hearing a voice prompt of “Succeeded',
press [*] until you nally exit the master
mode.
Enter [#] and enter master PIN code,
then conrm with [#].
Enter [3] to enter user record deletion
and enter [3] to enter user ngerprint
deletion, then enter [2] to delete all
ngerprints. After hearing a voice
prompt of “Succeeded", press [*] until
you nally exit the master mode.
Delete all ngerprints
Remove the battery cover, then double
press the [RES] hole with a sharp
object. When you hear a voice prompt
of “Restoring to default settings", it
means all user record are deleted.
System initialization
System settings
Enter [#] and enter master PIN code,
then conrm with [#].
Enter [4] to go to system settings and
enter [1] to go to language settings.
Choose the language as needed: For
Chinese, press [1]; for English, press
[2]. After hearing a voice prompt of
“Succeeded", press [*] until you nally
exit the master mode.
Language settings
or
The default language is English.
Attention
To Next Page
Loading...
Need help?
General
