Philips EasyKey 7000 Series User Manual

18
6. Other functions
Indoor infrared sensor unlock
Outside forced lock
Function:
Once the indoor infrared sensor
unlocking is enabled, you could easily
unlock the door from inside.
How to use:
Philips Easykey has an infrared sensor
on the handle. When the sensor is
triggered, you can press the sensor
module on both sides of the handle
simultaneously to unlock the door.
Enable/Disable:
When the infrared sensor unlocking is
disabled, long press the [OPEN/CLOSE]
button at the same time to turn on the
function, and the green light will glow
quickly;
When the infrared sensor unlocking is
enabled, long press the [OPEN/ CLOSE]
button at the same time to turn o the
function and the red light will glow
quickly.
Function:
Unlocking from inside will trigger an
alert.
How to use:
After the door is successfully locked,
long press the button for 2 seconds to
enter the outside forced lock mode.
Outside forced lock button
Enabling the outside forced lock function
will not aect the normal way to unlock the
door from outside.
Attention
Infrared sensor
Rear sensing area
Front sensing area
When the infrared sensor unlocking
is disabled, the indoor inductive
unlocking would be inactive. When
you touch both the front and rear
side of the sensing area on the
handle, the red light will light up
to remind you that the indoor
inductive unlocking is o.
Attention

Philips EasyKey 7000 Series Specifications

General

Brand	Philips
Model	EasyKey 7000 Series
Category	Door locks
Language	English