Philips HTL2193B User Manual

12 EN
Radio
Listen to FM radio on this product, and store up
to 40 radio stations.
Note
• Position the antenna as far as possible from TV or other
sources of radiation.
• For optimal reception, fully extend and adjust the
position of the antenna.
• AM and digital radio are not supported.
• If no stereo signal is detected, you are prompted to
install the radio stations again.
Auto install radio stations
1 Press RADIO to switch to radio source.
» If you have not installed any radio
stations, the message AUTO INSTALL
(auto install) scrolls on the display
panel.
2 Press to install radio stations.
» RADIO INSTALL (radio install) scrolls
on the display panel.
» This product automatically stores radio
stations with sufcient signal strength.
• To clear all the existing radio stations,
press and hold PROGRAM for
3 seconds to reinstall the radio stations.
Select a preset radio station
1 In radio mode, display a preset number
(press ).
2 Press / to select a preset number.
• Press RADIO to toggle between the
stereo and mono sound.
Tune to a radio station
1 In radio mode, display a radio frequency
(press ).
2 Press and hold / for more than
2 seconds.
» The radio tunes to a station
with strong reception reception
automatically.
3 Repeat step 2 to tune to more stations.
• To ne tune a radio frequency, press
briey / .
Program radio stations manually
1 Tune to a radio station.
2 Display the current radio frequency (press
).
3 Press briey PROGRAM.
» a number blinks on the display panel.
4 Press / to allocate a number to this
ration station.
5 Press to conrm.
6 Repeat the above steps to program other
stations.
Delete a preset station
1 In radio mode, display a preset number
(press ).
2 Press PROGRAM.
3 Press / to select a preset number.
4 Press to delete the radio station.
» When the radio station is deleted, DEL
is displayed briey.
Tuning grid
In some countries, you can toggle the FM tuning
grid between 50 kHz and 100 kHz.
1 Press RADIO to switch to radio source.
2 Press and hold RADIO to toggle between
50 kHz or 100 kHz.

Philips HTL2193B Specifications

General

Subwoofer type	Passive subwoofer
Subwoofer included	Yes
Subwoofer location	Separate
Subwoofer frequency range	45 - 200 Hz
Package width	395 mm
Package height	418 mm
Package weight	6600 g
Product color	Black
TV stand usage	-
Audio formats supported	MP3
Impedance	4 Ω
Number of woofer drivers	3
Soundbar speaker RMS power	96 W
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	30 W
Apple docking compatibility	Not supported
Subwoofer driver diameter (imperial)	1 \
Audio decoders	Dolby Digital, Dolby Pro Logic II
RMS rated power	150 W
Audio output channels	3.1 channels
Cables included	AC
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless

Weight and Dimensions

Depth	69 mm
Width	950 mm
Height	51 mm
Cord length	3 m
Soundbar weight	1620 g
Subwoofer depth	295 mm
Subwoofer width	165 mm
Subwoofer height	240 mm
Subwoofer weight	2780 g