Philips HTL2193B User Manual

14 EN
6 Wall mount
Note
• Before wall mounting, make sure the wall can support
the weight of this product.
• For wall mounting, this product must be securely
attached to the wall in accordance with the installation
instructions. Improper wall mounting may result in
accident, injury or damage. If you have any query,
contact Consumer Care in your country.
Screw length/diameter
Depending on the type of wall mounting this
product, make sure that you use screws of a
suitable length and diameter.
See the illustration in the quick start guide on
how to wall mount this product.
1) Drill two holes on the wall.
2) Secure the dowels and screws in the holes.
3) Hang this product on the fastening screws.
3.2-3.6 mm/0.13”-0.14”
≤9 mm/
0.35”
3.5-4 mm/
0.14”-0.16”
>25 mm/0.98”
7 Product
specifications
Note
• Specications and design are subject to change without
notice.
Amplier
• Total output power:
150W RMS (+/- 0.5 dB, 10% THD)
• Frequency response:
20 Hz-20 kHz / +/- 3 dB
• Signal-to-noise ratio:
> 65 dB (CCIR) / (A-weighted)
• Input sensitivity:
• AUX: 2 V
• AUDIO IN: 1 V
Audio
• S/PDIF Digital audio input:
• Coaxial: IEC 60958-3
• Optical: TOSLINK
Radio
• Tuning range:
FM 87.5-108 MHz (50/100 kHz)
• Tuning grid: 50/100 kHz
• Sensitivity
• Mono, 26dB S/N Ratio: ≤ 22 dBf
• Stereo, 46dB S/N Ratio: ≥ 48 dBf
• Search Selectivity: ≤ 32 dBf
• Total Harmonic Distortion: < 3%
• Signal to Noise Ratio: ≥ 45 dB
USB
• Compatibility: Hi-Speed USB (2.0)
• Class support: USB Mass Storage Class (MSC)
• File system: FAT16, FAT32, NTFS
• Supports MP3 le formats

Philips HTL2193B Specifications

General

Subwoofer type	Passive subwoofer
Subwoofer included	Yes
Subwoofer location	Separate
Subwoofer frequency range	45 - 200 Hz
Package width	395 mm
Package height	418 mm
Package weight	6600 g
Product color	Black
TV stand usage	-
Audio formats supported	MP3
Impedance	4 Ω
Number of woofer drivers	3
Soundbar speaker RMS power	96 W
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	30 W
Apple docking compatibility	Not supported
Subwoofer driver diameter (imperial)	1 \
Audio decoders	Dolby Digital, Dolby Pro Logic II
RMS rated power	150 W
Audio output channels	3.1 channels
Cables included	AC
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless

Weight and Dimensions

Depth	69 mm
Width	950 mm
Height	51 mm
Cord length	3 m
Soundbar weight	1620 g
Subwoofer depth	295 mm
Subwoofer width	165 mm
Subwoofer height	240 mm
Subwoofer weight	2780 g