Philips HTL2193B User Manual

5EN
AUX: Switch your audio source to the
AUX connection.
AUDIO IN: Switch your audio source to
the MP3 connection (3.5mm jack).
USB: Switch to USB mode.
: Switch to Bluetooth mode.
RADIO: Switch to radio mode.
c / (Previous/Next)
• Skip to the previous or next track in
USB mode.
• In radio mode, when the preset
number is displayed, press to select a
preset radio station.
• In radio mode, when the radio
frequency is displayed, press and hold
to search a radio station, or press
briey to ne tune a radio frequency.
d (Play/Pause)
• Start, pause or resume play in USB
mode.
• In radio mode, toggle display between
the current preset number and
frequency.
e BASS +/-
Increase or decrease bass.
f Volume control
• +/-: Increase or decrease volume.
• : Mute or restore volume.
g MUSIC
Select stereo sound mode for the best
music experience.
h AUDIO SYNC +/-
Increase or decrease audio delay.
i DIM
Set the brightness of the display panel for
this product.
j NIGHT / PROGRAM
• Turn night mode on or off.
• In radio mode, press and hold for
three seconds to reinstall the radio
stations.
k MOVIE
Select surround sound mode for the best
movie experience.
l VOICE
Select voice sound mode to enhance voice
clarity.
m TREBLE +/-
Increase or decrease treble.
Connectors
This section includes an overview of the
connectors available on this product.
a HDMI OUT (ARC) - TO TV
Connect to the HDMI (ARC) input on
the TV.
b FM antenna
Connect the supplied FM antenna. Extend
the FM antenna for better reception.
c DC IN
Connect to the power supply.
d SUBWOOFER
Connect to the supplied subwoofer.
e DIGITAL IN-COAXIAL
Connect to a coaxial audio output on the
TV or a digital device.
b
a
dc
i
h
gfe

Philips HTL2193B Specifications

General

Subwoofer type	Passive subwoofer
Subwoofer included	Yes
Subwoofer location	Separate
Subwoofer frequency range	45 - 200 Hz
Package width	395 mm
Package height	418 mm
Package weight	6600 g
Product color	Black
TV stand usage	-
Audio formats supported	MP3
Impedance	4 Ω
Number of woofer drivers	3
Soundbar speaker RMS power	96 W
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	30 W
Apple docking compatibility	Not supported
Subwoofer driver diameter (imperial)	1 \
Audio decoders	Dolby Digital, Dolby Pro Logic II
RMS rated power	150 W
Audio output channels	3.1 channels
Cables included	AC
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless

Weight and Dimensions

Depth	69 mm
Width	950 mm
Height	51 mm
Cord length	3 m
Soundbar weight	1620 g
Subwoofer depth	295 mm
Subwoofer width	165 mm
Subwoofer height	240 mm
Subwoofer weight	2780 g