Philips HTL2193B User Manual

15EN
Bluetooth
• Bluetooth proles: A2DP, AVRCP
• Bluetooth version: 4.0 + EDR
Main unit
• Power supply:
• Model (Philips branded AC power
adapter): TNUA3202003
• Input: 100-240 V~, 50/60 Hz 1.65 A
• Output: 32 V , 2.0 A
• Standby power consumption: ≤ 0.5 W
• Dimensions (W x H x D):
950 x 51 x 69 mm
• Weight: 1.6 kg
• Built-in speakers:
• Drivers: 3 x full range
(90mm/3.5" x 34mm/1.3")
• Impedance: 4 ohm
• Operating temperature and humidity:
0°C to 45°C, 5% to 90% humidity for all
climates
• Storage temperature and humidity:
-40°C to 70°C, 5% to 95%
Subwoofer
• Impedance: 2 ohm
• Speaker driver: 1 x 134 mm (5.25") woofer
• Dimensions (W x H x D):
165 x 240 x 296 mm
• Weight: 2.8 kg
Remote control batteries
• 1 x AAA-R03-1.5 V
8 Troubleshooting
Warning
• Risk of electric shock. Never remove the casing of the
product.
To keep the warranty valid, never try to repair
the product yourself.
If you have problems using this product, check
the following points before you request service.
If you still have a problem, get support at
www.philips.com/support.
Main unit
The buttons on this proudct do not work.
• Disconnect this product from the power
supply for a few minutes, then reconnect.
Sound
No sound from the speakers of this product.
• Connect the audio cable from this product
to your TV or other devices.
• Make sure that you connect the audio
input on this product to the audio output
on your TV or other devices.
• Reset this product to its factory settings.
• On the remote control, select the correct
audio input.
• Make sure that this product is not muted.
Distorted sound or echo.
• If you play audio from the TV through this
product, make sure that the TV is muted.
Audio and video are not synchronized.
• Press AUDIO SYNC +/- to synchronize
the audio with the video.
Error message is displayed on the display
panel.
• When "ERROR" is displayed, it indicates
that an input audio format is not
supported.

Philips HTL2193B Specifications

General

Subwoofer type	Passive subwoofer
Subwoofer included	Yes
Subwoofer location	Separate
Subwoofer frequency range	45 - 200 Hz
Package width	395 mm
Package height	418 mm
Package weight	6600 g
Product color	Black
TV stand usage	-
Audio formats supported	MP3
Impedance	4 Ω
Number of woofer drivers	3
Soundbar speaker RMS power	96 W
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	30 W
Apple docking compatibility	Not supported
Subwoofer driver diameter (imperial)	1 \
Audio decoders	Dolby Digital, Dolby Pro Logic II
RMS rated power	150 W
Audio output channels	3.1 channels
Cables included	AC
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless

Weight and Dimensions

Depth	69 mm
Width	950 mm
Height	51 mm
Cord length	3 m
Soundbar weight	1620 g
Subwoofer depth	295 mm
Subwoofer width	165 mm
Subwoofer height	240 mm
Subwoofer weight	2780 g