Philips HTL4110B User Manual

9EN
5 Use your
SoundStage
This section helps you use the SoundStage to
play media from a wide range of sources.
Before you start
• Make the necessary connections described
in Quick start guide and User manual.
• Switch the TV to the correct source for
the SoundStage.
Adjust the volume
1 Rotate the power knob or press VOLUME
+/- on remote control to increase or
decrease a volume level.
• To mute sound, press .
• To restore the sound, press again or
press VOLUME +/-.
Choose your sound
This section helps you choose the ideal sound
for your video or music.
Surround sound mode
Experience an immersive audio experience with
surround sound modes.
1 Press SURR repeatedly to select surround
mode or stereo mode.
Equalizer
Change the high frequency (treble) and low
frequency (bass) settings of the SoundStage.
1 Press TREBLE +/- or BASS +/- to change
the treble or bass level.
Night mode
For quiet listening, night mode decreases the
volume of loud sounds when audio is played.
Night mode is only available for Dolby Digital
soundtracks.
1 Press NIGHT MODE to turn night mode
on or off.
MP3 player
Connect your MP3 player to play your audio
lesormusic.
What you need
• An MP3 player.
• A 3.5mm stereo audio cable.
1 Using the 3.5mm stereo audio cable,
connect the MP3 player to the AUDIO IN
connector on your SoundStage.
2 Press AUDIO IN on the remote control.
3 Press the buttons on the MP3 player to
selectandplayaudiolesormusic.
Play audio through Bluetooth
Through Bluetooth, connect the SoundStage
with your Bluetooth device (such as an iPad,
iPhone, iPod touch, Android phone, or laptop),
andthenyoucanlistentotheaudiolesstored
on the device through your SoundStage.
What you need
• A Bluetooth device which supports
BluetoothproleA2DP,AVRCPandwith
Bluetooth version as 3.0 + EDR.
• The operational range between the
SoundStage and a Bluetooth device is
approximately 10 meters (30 feet).
1 Press Bluetooth on the remote control
to switch the SoundStage to Bluetooth
mode.
» [BT] is displayed.

Philips HTL4110B Specifications

General

Package depth	372 mm
Package width	800 mm
Package height	142 mm
Package weight	8600 g
Impedance	4 Ω
Number of tweeter drivers	1
Soundbar speaker RMS power	40 W
Tweeter diameter (imperial)	1 \
Total Harmonic Distortion (THD)	10 %
Quantity outer carton	1 pc(s)
Width (cm) outer carton	38.8 cm
Height (cm) outer carton	17.1 cm
Length (cm) outer carton	82 cm
Docking connector type	-
Apple docking compatibility	Not supported
Master (outer) case weight	9510 g
Audio decoders	Dolby Digital
RMS rated power	80 W
Audio output channels	2.1 channels
Audio Return Channel (ARC)	Yes
Product color	Black
Recommended usage	Universal
Audio formats supported	MP3, WMA
Consumer Electronics Control (CEC)	EasyLink
AC input voltage	110-240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	20 W
HDMI version	1.4
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless

Weight and Dimensions

Depth	325 mm
Width	701 mm
Height	68 mm
Soundbar weight	6500 g