Philips HTL4110B User Manual

14 EN
Bluetooth
A device cannot connect with the SoundStage.
• The device does not support the
compatibleprolesrequiredforthe
SoundStage.
• You have not enabled the Bluetooth
function of the device. See the user manual
of the device on how to enable the
function.
• The device is not correctly connected.
Connect the device correctly.
• The SoundStage is already connected with
another Bluetooth device. Disconnect the
connected device, then try again.
Quality of audio play from a connected
Bluetooth device is poor.
• The Bluetooth reception is poor. Move
the device closer to the SoundStage, or
remove any obstacle between the device
and the SoundStage.
The connected Bluetooth device connects and
disconnects constantly.
• The Bluetooth reception is poor. Move
the device closer to the SoundStage, or
remove any obstacle between the device
and the SoundStage.
• Turn off Wi-Fi function on the Bluetooth
device to avoid interference.
• For some Bluetooth, the Bluetooth
connection can be deactivated
automatically to save power. This does not
indicate any malfunction of the SoundStage.
NFC
A device cannot connect with this product via
NFC.
• Make sure that the device is supported by
NFC.
• Make sure that NFC is enabled on the
device (see the device' s user manual for
details).
• For pairing, tap the NFC device on the
NFC tag of this product.
9 Notice
This section contains the legal and trademark
notices.
Compliance
This product complies with the radio
interference requirements of the European
Community.
Hereby, WOOX Innovations, declares that this
product is in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC.
A copy of the EC declaration of Conformity
is available in the Portable Document
Format (PDF) version of the user manual at
www.philips.com/support.
Trademarks
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
The Bluetooth
®
word mark and logos are
registered trademarks owned by Bluetooth
SIG,Inc.andanyuseofsuchmarksbyWOOX
Innovations is under license.
ThetermsHDMIandHDMIHigh-Denition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI

Philips HTL4110B Specifications

General

Package depth	372 mm
Package width	800 mm
Package height	142 mm
Package weight	8600 g
Impedance	4 Ω
Number of tweeter drivers	1
Soundbar speaker RMS power	40 W
Tweeter diameter (imperial)	1 \
Total Harmonic Distortion (THD)	10 %
Quantity outer carton	1 pc(s)
Width (cm) outer carton	38.8 cm
Height (cm) outer carton	17.1 cm
Length (cm) outer carton	82 cm
Docking connector type	-
Apple docking compatibility	Not supported
Master (outer) case weight	9510 g
Audio decoders	Dolby Digital
RMS rated power	80 W
Audio output channels	2.1 channels
Audio Return Channel (ARC)	Yes
Product color	Black
Recommended usage	Universal
Audio formats supported	MP3, WMA
Consumer Electronics Control (CEC)	EasyLink
AC input voltage	110-240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	20 W
HDMI version	1.4
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless

Weight and Dimensions

Depth	325 mm
Width	701 mm
Height	68 mm
Soundbar weight	6500 g