Philips HTL4110B User Manual

13EN
Bluetooth
• Bluetoothproles:A2DP,AVRCP
• Bluetooth version: 3.0 + EDR
Main unit
• Power supply: 110-240 V~, 50/60 Hz
• Power consumption: 20 W
• Standbypowerconsumption:≤0.5W
• Speaker impedance: 4 ohm
• Speaker drivers: 2 x racetrack mid range
(1.5" x 5") + 2 x 1" tweeter + 1 x 4"
woofer
• Dimensions (WxHxD):
701 x 68 x 325 mm
• Weight: 6.3 kg
• Operating temperature and humidity:
0°C to 45°C, 5% to 90% humidity for all
climates
• Storage temperature and humidity: -40°C
to 70°C, 5% to 95%
Remote control batteries
• 1 x CR2025
8 Troubleshooting
Warning
• Risk of electric shock. Never remove the casing of the
product.
To keep the warranty valid, never try to repair
the product yourself.
If you have problems using this product, check
the following points before you request service.
If you still have a problem, get support at
www.philips.com/support.
Main unit
The buttons on the SoundStage do not work.
• Disconnect the SoundStage from the
power supply for a few minutes, then
reconnect.
Sound
No sound from SoundStage speakers.
• Connect the audio cable from your
SoundStage to your TV or other devices.
However, you do not need a separate
audio connection when the SoundStage
and TV are connected through HDMI ARC
connection.
• Reset your SoundStage to its factory
settings.
• On the remote control, select the correct
audio input.
• Make sure that the SoundStage is not
muted.
Distorted sound or echo.
• If you play audio from the TV through
the SoundStage, make sure that the TV is
muted.

Philips HTL4110B Specifications

General

Package depth	372 mm
Package width	800 mm
Package height	142 mm
Package weight	8600 g
Impedance	4 Ω
Number of tweeter drivers	1
Soundbar speaker RMS power	40 W
Tweeter diameter (imperial)	1 \
Total Harmonic Distortion (THD)	10 %
Quantity outer carton	1 pc(s)
Width (cm) outer carton	38.8 cm
Height (cm) outer carton	17.1 cm
Length (cm) outer carton	82 cm
Docking connector type	-
Apple docking compatibility	Not supported
Master (outer) case weight	9510 g
Audio decoders	Dolby Digital
RMS rated power	80 W
Audio output channels	2.1 channels
Audio Return Channel (ARC)	Yes
Product color	Black
Recommended usage	Universal
Audio formats supported	MP3, WMA
Consumer Electronics Control (CEC)	EasyLink
AC input voltage	110-240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	20 W
HDMI version	1.4
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless

Weight and Dimensions

Depth	325 mm
Width	701 mm
Height	68 mm
Soundbar weight	6500 g