Philips TAB5706 User Manual

English
11
3 Connect
This section helps you connect your
Soundbar to a TV and other devices,
and then set it up.
For information about the basic
connections of your Soundbar and
accessories, see the quick start guide.
Note
•
For identication and supply ratings, see
the type plate at the back or bottom of the
product.
• Before you make or change any connections,
make sure that all devices are disconnected
from the power outlet.
Connect to HDMI Socket
ARC (Audio Return Channel)
Your Soundbar supports HDMI with
Audio Return Channel (ARC). If your TV
is HDMI ARC compliant, you can hear
the TV audio through your Soundbar by
using a single HDMI cable.
HDMI (ARC)
HDMI ARC
1 On your TV, turn on HDMI-CEC
operations. For details, see the TV
user manual.
• The HDMI ARC connector on the
TV might be labeled dierently.
For details, see the TV user
manual.
2 Using a High Speed HDMI cable,
connect the HDMI ARC connector
on your Soundbar to the HDMI ARC
connector on the TV.
Note
•
Your TV must support the HDMI-CEC and ARC
function. HDMI-CEC and ARC must be set to
On.
• The setting method of HDMI-CEC and ARC
may dier depending on the TV. For details
about ARC function, please refer to your TV
owner’s manual.
• Make sure to use the HDMI cables can support
the ARC function.
Connect to Optical
Socket
OPTICAL OUT
OPTICAL IN
1 Using an optical cable, connect
the OPTICAL connector on your
Soundbar to the OPTICAL OUT
connector on the TV or other device.
• The digital optical connector
might be labeled SPDIF or
SPDIF OUT.

Philips TAB5706 Specifications

General

Brand	Philips
Model	TAB5706
Category	Speaker System
Language	English