Philips TAB8507 User Manual

12 EN
Wall mount
Note
•
Improper wall mounting may result in accident,
injury or damage. If you have any query, contact
Consumer Care in your country.
• Before wall mounting, make sure the wall can
support the weight of your soundbar.
• Before wall mounting, you need not remove
the rubber feet at the bottom of the soundbar,
otherwise the rubber feet cannot be xed back.
• Depending on the type of wall mounting, make
sure that you use screws of a suitable length
and diameter.
• Please check whether the USB port on the back of
the soundbar is connected to a USB device. If it is
found that the connected USB device affects the
wall-mount, you need to use another USB device
of the appropriate size.
Screw length/diameter
3.5-4mm/0.14 -0.16"
4mm/
0.16"
>32mm/1.26"
Suggested wall mounting height
You are recommended to install the TV
rst before wall mounting the soundbar.
With a TV preinstalled, wall mount the
soundbar 50mm/2.0’’ in distance from
the bottom of the TV.
WARNING!
•
To prevent injury, this apparatus must be securely
attached to the oor/wall in accordance with the
installation instructions.
• Suggested wall mounting height: ≤ 1.5 meters.
3
4
1
~50mm/2.0"
628mm / 24.7”
2
3.5-4mm/0.14 -0.16"
4mm/
0.16"
>32mm/1.26"
1 Drill 2 parallel holes (Diameter 3-8mm
each according to wall type) on the
wall.
» The distance between the holes
are: 628 mm / 24.7”
» You can use the wall mount
template provided for helping the
drilling holes position on the wall.
2 Secure the dowels and screws in the
holes.
» Be sure to leave a 3.5-4mm gap
between the wall and the screw’s
head.
3 Attach the wall brackets (x2) into the
back of the unit.
4 Hang the soundbar on the fastening
screws.

Philips TAB8507 Specifications

General

Subwoofer type	Active subwoofer
Subwoofer included	Yes
Subwoofer connectivity	Wireless
Subwoofer frequency range	35 - 150 Hz
Audio decoders	Dolby Digital, Dolby Digital Plus, Dolby TrueHD
RMS rated power	600 W
Audio output channels	3.1 channels
Number of woofer drivers	1
Woofer diameter (imperial)	6.5 \
Number of full-range drivers	2
Total Harmonic Distortion (THD)	10 %
Bluetooth profiles	A2DP, AVRCP
Soundbar impedance	8 Ω
Soundbar frequency range	150 - 20000 Hz
HDCP version	1.4/2.3
Wi-Fi frequency	5 GHz
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Bluetooth version	5.3
Display type	LED
Product color	Silver
Audio formats supported	AAC, AIFF, FLAC, LPCM, M4A, MP3, SBC, WAV
High Dynamic Range (HDR) technology	Dolby Vision, High Dynamic Range 10 (HDR10), High Dynamic Range 10+ (HDR10 Plus), Hybrid Log-Gamma (HLG)
Cables included	AC
Number of products included	1 pc(s)
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Package depth	450 mm
Package width	1050 mm
Package height	185 mm
Package weight	11000 g
Width (cm) outer carton	60 cm
Height (cm) outer carton	21 cm
Length (cm) outer carton	107 cm
Tare weight outer carton	7 kg
Net weight of outer carton	16.6 kg
Gross weight of outer carton	23.6 kg

Weight and Dimensions

Depth	106 mm
Width	940 mm
Height	65 mm
Soundbar weight	2700 g
Subwoofer depth	309 mm
Subwoofer width	150 mm
Subwoofer height	410 mm
Subwoofer weight	5600 g