Philips TAB8507 User Manual

24 EN
1 Press the button repeatedly on the
unit or on the remote control to select
the Optical,
Audio in, HDMI in, HDMI
ARC mode.
2 Operate your audio device directly
for playback features.
3 Press the VOL +/– buttons to adjust
the volume to your desired level.
» When selecting a dierent audio
format, the soundbar will display
the following as follows:
Audio (abbreviation) Display
LPCM 2ch PCM
LPCM 5.1ch PCM
LPCM 7.1ch PCM
Dolby Digital Dolby AUDIO
Dolby TrueHD Dolby AUDIO
Dolby Digital Plus Dolby AUDIO
Dolby Atmos -
Dolby TrueHD
Dolby Atmos
Dolby Atmos -
Dolby Digital Plus
Dolby Atmos
Note
•
The unit may not be able to decode all digital
audio formats from the input source. In this case,
the unit will mute. This is NOT a defect. Ensure
that the audio setting of the input source (e.g.
TV, game console, DVD player, etc.) is set to PCM
or Dolby Digital (Refer to the user manual of the
input source device for its audio setting details)
with HDMI in / HDMI ARC / Optical input.
Play audio through USB
Enjoy audio on a USB storage device,
such as an MP3 player and USB ash
memory, etc.
1 Insert the USB device.
2 Press the button repeatedly on
the unit or on the remote control to
select the USB mode.
3 During playback:
Button Action
Start, pause or resume play.
/
Skip to the previous or next track.
Tips
•
The unit may not be compatible with certain
types of USB storage devices.
• If you use a USB extension cable, USB hub,
or USB multifunctional card reader, the USB
storage device may not be recognized.
• Do not remove the USB storage device during
le reading.
• The unit can support USB devices with up to 32
GB of memory.
• This unit can play MP3 / WAV / FLAC.
• Support a USB port: 5V 500mA.
Factory reset
Reset device to default setting.
• Turn on the soundbar, press and hold
the +/- buttons at the same time for
8 seconds.
» Display shows “RESET” for 5
seconds.
» While system reboots, display
shows “REBOOT”.

Philips TAB8507 Specifications

General

Subwoofer type	Active subwoofer
Subwoofer included	Yes
Subwoofer connectivity	Wireless
Subwoofer frequency range	35 - 150 Hz
Audio decoders	Dolby Digital, Dolby Digital Plus, Dolby TrueHD
RMS rated power	600 W
Audio output channels	3.1 channels
Number of woofer drivers	1
Woofer diameter (imperial)	6.5 \
Number of full-range drivers	2
Total Harmonic Distortion (THD)	10 %
Bluetooth profiles	A2DP, AVRCP
Soundbar impedance	8 Ω
Soundbar frequency range	150 - 20000 Hz
HDCP version	1.4/2.3
Wi-Fi frequency	5 GHz
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Bluetooth version	5.3
Display type	LED
Product color	Silver
Audio formats supported	AAC, AIFF, FLAC, LPCM, M4A, MP3, SBC, WAV
High Dynamic Range (HDR) technology	Dolby Vision, High Dynamic Range 10 (HDR10), High Dynamic Range 10+ (HDR10 Plus), Hybrid Log-Gamma (HLG)
Cables included	AC
Number of products included	1 pc(s)
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Package depth	450 mm
Package width	1050 mm
Package height	185 mm
Package weight	11000 g
Width (cm) outer carton	60 cm
Height (cm) outer carton	21 cm
Length (cm) outer carton	107 cm
Tare weight outer carton	7 kg
Net weight of outer carton	16.6 kg
Gross weight of outer carton	23.6 kg

Weight and Dimensions

Depth	106 mm
Width	940 mm
Height	65 mm
Soundbar weight	2700 g
Subwoofer depth	309 mm
Subwoofer width	150 mm
Subwoofer height	410 mm
Subwoofer weight	5600 g