03_13
03_14
03_15
1. Rest the vehicle upright on the stand and remove the screw of the expansion tank
cap shown in the photograph.
2. Remove the expansion tank cap «A» by turning it anticlockwise.
3. Look inside the expansion tank: the fluid level must always be between the min and
the max level
4. If the coolant level is near the minimum mark, top-up when the engine is cold.
If the coolant needs to be topped up frequently or the expansion tank is completely
dry, check the cooling system to find the cause of the problem. It is therefore essential
to have the cooling system checked at an Authorised Service Centre. Replace cool-
ant as indicated in the scheduled maintenance table. Take your vehicle to an
Authorised Service Centre for this operation.
WARNING
TO AVOID THE RISK OF SCALDING, DO NOT UNSCREW THE EXPANSION
TANK COVER WHILE THE ENGINE IS STILL HOT.
WARNING
TO PREVENT AVOID HARMFUL FLUID LEAKAGE WHILE RIDING, ENSURE
THAT THE LEVEL NEVER EXCEEDS THE MAXIMUM VALUE.
TO ENSURE CORRECT ENGINE OPERATION, KEEP THE RADIATOR GRILLE
CLEAN.
Recommended products
AGIP PERMANENT SPECIAL
Ethylene glycol antifreeze liquid with organic inhibition additives. Red, ready to use.
ASTM D 3306 - ASTM D 4656 - ASTM D 4985 - CUNA NC 956-16
78
To Next Page
Loading...
Need help?
General