EasyManuals Logo
Home>PIAGGIO>Scooter>X8 400 i.e.

PIAGGIO X8 400 i.e. User Manual

PIAGGIO X8 400 i.e.
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #66 background imageLoading...
Page #66 background image
03_22
03_23
03_24
Front light group (03_22, 03_23, 03_24)
To remove the rear light assembly, proceed as follows:
1. Remove the mirror cover, fastened by the two top screws and retained by the lower
rubber ring joining it to the lower fairing;
2. Remove both driving mirrors by loosening the fixing screws "A" on the right and left
hand-side;
3. Loosen the four fixing screws "B" and then remove the headlight cover;
4. Extract the headlight from it housing by loosening the three fixing screws "D";
To reassemble, repeat the operation in the reverse order.
WARNING
HIGH AND LOW BEAM LIGHT ARE OF THE HALOGEN TYPE: DO NOT TOUCH
WITH YOUR FINGERS TO AVOID DAMAGING THEIR FUNCTION.
66
3 Maintenance

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the PIAGGIO X8 400 i.e. and is the answer not in the manual?

PIAGGIO X8 400 i.e. Specifications

General IconGeneral
BrandPIAGGIO
ModelX8 400 i.e.
CategoryScooter
LanguageEnglish

Related product manuals