03_31
Rear turn indicators (03_31)
Detach the taillight to reach the fixing screw of the turn indicator.
Detach the rubber bulb holder and slide the burned out bulb off the bayonet joint.
03_32
Number plate light (03_32, 03_33)
Follow these instructions to replace the license plate light bulb:
•
Remove the rubber cap at the back of the helmet compartment.
•
Remove the rubber bulb holder from its housing; then take the bulb off the
holder and replace it.
•
Install the bulb holder in its position on the mudguard and mount the rubber
cap back.
69
To Next Page
Loading...
Need help?
General