handle: the oscilloscope of the required oscilloscope
no_of_samples: the number of samples to return
timebase: a code between 0 and the maximum timebase available
(consult the driver header file). Timebase 0 gives the maximum
sample rate available, timebase 1 selects a sample rate half as fast,
timebase 2 is half as fast again and so on. For the maximum sample
rate, see the specifications for your oscilloscope. The number of
channels enabled may affect the availability of the fastest
timebases.
oversample: the oversampling factor, a number between 1 and
256. See Oversampling for details.
time_indisposed_ms: a pointer to the approximate time, in
milliseconds, that the ADC will take to collect data. If a trigger is
set, it is the amount of time the ADC takes to collect a block of data
after a trigger event, calculated as (sample interval) x (number of
points required). The actual time may differ from computer to
computer, depending on how quickly the computer can respond to I/
O requests.
To Next Page
Loading...
Need help?
General
