pico Technology PicoScope 2200A Series Programmer's Guide

PicoScope 2000 Series Programmer's Guide 39
Copyright © 2006–2016 Pico Technology Ltd. All rights reserved. ps2000pg.en r11
5.22
ps2000SetAdvTriggerChannelProperties
int16_t ps2000SetAdvTriggerChannelProperties
(
int16_t handle,
PS2000_TRIGGER_CHANNEL_PROPERTIES *channelProperties,
int16_t nChannelProperties,
int32_t autoTriggerMilliseconds
)
This function is used to enable or disable triggering and set its parameters.
Applicability
Available in block mode and fast streaming mode only
PicoScope 2202, 2204, 2204A, 2205 and 2205A only
Arguments
handle: the handle of the required oscilloscope
channelProperties: a pointer to a
PS2000_TRIGGER_CHANNEL_PROPERTIES structure describing the
requested properties. If NULL, triggering is switched off.
nChannelProperties: should be set to 1 if channelProperties
is non-null, otherwise 0
autoTriggerMilliseconds: the time in milliseconds for which
the oscilloscope will wait before collecting data if no trigger event
occurs. If this is set to zero, the oscilloscope will wait indefinitely for
a trigger.
Returns
0: if unsuccessful, or if one or more of the arguments are out of
range
non-zero: if successful

pico Technology PicoScope 2200A Series Specifications

General

Brand	pico Technology
Model	PicoScope 2200A Series
Category	Test Equipment
Language	English