Pilz PNOZmulti User Manual

Contents
Installation Manual PNOZmulti Installation Manual
1002265-EN-02
3
Section 1 Introduction 5
1.1 Validity of the documentation 5
1.2 Definition of symbols 5
Section 2 Safety 7
2.1 General safety guidelines 7
2.2 Use of qualified personnel 7
2.3 Safety during installation 7
2.3.1 Power supply 7
2.3.2 Installation 8
2.3.3 Chip card 8
Section 3 Electromagnetic compatibility (EMC) 10
3.1 Overview 10
3.2 Making the installation EMC-compliant 11
3.2.1 Connecting the earth cables 11
3.2.2 Cable routing 11
3.2.3 Connecting the fieldbuses 12
3.2.4 Equipotential bonding 12
3.2.5 Shielding 12
3.2.6 Suppression on inductive loads 13
3.2.7 Lighting in the control cabinet 13
3.3 Testing the EMC-compliance of an installation 14
Section 4 Installation 16
4.1 Control cabinet installation 16
4.1.1 General installation guidelines 16
4.1.1.1 Positioning of units 16
4.1.2 Mounting distances 17
4.2 Install the control system PNOZmulti 18
4.2.1 Install base unit without expansion module 18
4.2.2 Connect the base unit and expansion modules 18
4.3 Install the control system PNOZmulti Mini 19
4.3.1 Install base unit without expansion module 19
4.3.2 Connect the base unit and expansion modules 20
4.4 Install the control system PNOZmulti 2 21
4.4.1 Install base unit without expansion module 21
4.4.2 Connecting the base unit and expansion modules 22
Section 5 Connecting the Control System PNOZmulti 23
5.1 General wiring guidelines 23
5.2 Supply voltage 23
5.3 Earthing 24
5.4 Cable requirements 24
5.5 Terminals 25
5.6 Connecting safety inputs and outputs 25
5.7 Example of EMC-compliant wiring 26

Pilz PNOZmulti Specifications

General

Brand	Pilz
Model	PNOZmulti
Category	Control Systems
Language	English