32
A-307R, A-207R
1 CD POWER button
Switches CD player power STANDBY/ON.
2 TAPE SELECT button
Selects the cassette No. (1 to 6) for multi-cassette changer.
3 DECK II button
To operate Deck II, press this button before pressing the
operating buttons. Also, when using a single deck, press this
button before pressing the operating buttons.
4 DECK I button
To operate Deck I, press this button before pressing the
operating buttons.
5 DISC SELECT button
Press this to select discs on a multi or twin tray compact disc
player.
6 Input selector button
Use to select the playback source.
CD : For compact disc playback with a CD player.
TUNER : For AM or FM broadcast reception with a tuner.
PHONO : For record playback with a turntable.
TAPE 1 : For playback with a cassette deck or MD deck
recorder connected to TAPE 1/MD terminals.
TAPE 2 : For playback with a cassette deck or adaptor
connected to TAPE 2 MONITOR terminals.
LINE : For playback with a component connected to the
LINE terminal.
7 TUNER POWER button
Switches TUNER power STANDBY/ON.
8 TAPE POWER button
Switches the cassette deck power STANDBY/ON.
(Can not turn ON/OFF some cassette decks.)
9 TAPE operation buttons
2, 3 : Playback in the direction of the arrows.
7 : Stop
1, ¡ : Tape fast forward/reverse.
0 CD player operation buttons
4 : Returns you to the start of the current track.
(Track search)
¢ : Takes you to the start of the next track.
(Track search)
7 : Stop
3 : Play
- STATION + (up), – (down) buttons
Calls each station number in sequence.
= VOLUME + (up), – (down) buttons
+ ........................................................ Increases the volume.
– ...................................................... Decreases the volume.
NOTE:
When the accessory remote control unit is used to operate
other Pioneer components with the Î mark, it cannot be used
to operate functions which do not correspond to the functions
listed on the remote control unit.
T AM
M T T T
T TA
TA
T
K
K
ΙΙ
APE
CD
T
TAT
TUNER
T
V M
TA TA 2
+
+
REMOTE CONTROL