07
68
En
KURO LINK
A message other than
“Network connection test
completed successfully” is
displayed when Connection
Test is performed.
Is “LAN cable not connected” displayed? Check that this player and Ethernet hub (or router with hub
functionality) are properly connected.
• Is “IP address cannot be obtained.” displayed?
• Is “No response from the gateway.” displayed?
• If the IP address is obtained using the DHCP server function,
check the setting is correct at the Display Network
Configuration (page 50). For details on the DHCP server
function, see the operating instructions of the Ethernet hub (or
router with hub functionality).
• Set the IP address manually.
Is “IP address is overlapped.” displayed? • Check the operation and settings of the DHCP server
function of the Ethernet hub (or router with hub functionality).
For details on the DHCP server function, see the operating
instructions of the Ethernet hub (or router with hub
functionality).
• If this player’s has been set manually, reset the IP address of
this player or other components.
Is the Ethernet hub (or router with hub functionality) operating
properly?
• Check the settings and operation the Ethernet hub (or router
with hub functionality). For details, see the operating
instructions of the Ethernet hub.
• Reboot the Ethernet hub (or router with hub functionality).
Problem Check Remedy
KURO LINK function does
not work.
• Is the HDMI cable properly connected?
• Are you connected to the HDMI OUT (SUB) terminal?
To use the KURO LINK function, connect the Flat Screen TV,
AV system (AV receiver or amplifier, etc.) and HD AV Converter
to the HDMI OUT (MAIN) terminal (page 15).
Is the HDMI cable you are using a High Speed HDMI™ cable? Use a High Speed HDMI™ cable. The KURO LINK function
may not work properly if HDMI cable other than a High Speed
HDMI™ cable is used.
Is KURO LINK set to On on the player? Set KURO LINK to On on the player (page 44).
Does the connected device support the KURO LINK function? • The KURO LINK function will not work with devices
manufactured by companies other than Pioneer, even when
connected using an HDMI cable.
• The KURO LINK function will not work if devices that do not
support the KURO LINK function or devices manufactured by
companies other than Pioneer are connected between the
KURO LINK-compatible device and the player.
• Even when connected to a Pioneer product compatible with
the KURO LINK function, some of the functions may not work.
Also refer to the operating instructions of the connected
device.
Is KURO LINK set to On on the connected device? Set KURO LINK to On on the connected device. The KURO
LINK function operates when KURO LINK is set to On for all
devices connected to the HDMI OUT (MAIN) terminal.
Once connections and settings of all the devices are finished,
be sure to check that the player’s picture is output to the Flat
Screen TV. (Also check after changing the connected devices
and connecting and/or disconnecting HDMI cables.) If the
player’s picture is not being output to the Flat Screen TV, the
KURO LINK function may not work properly.
For details, refer to the operating instructions of the connected
device.
Are multiple players connected? The KURO LINK function may not work if three or more players,
including this player, are connected by HDMI cable.
Problem Check Remedy
To Next Page
Loading...
Need help?
General
