Message Cause Action
Loading Disc is being read.
Please wait, it may take several minutes
for some disc or storage device.
No Disc
Disc is dirty. Clean disc with soft cloth.
Disc is upside down. Insert disc with label side up.
Disc not present in loading
compartment.
Insert disc.
Bad Disc
Disc is dirty. Clean disc with soft cloth.
Disc is upside down. Insert disc with label side up.
Unknown disc
Disc format is not compatible
The file is not supported.
with this unit.
Change another disc.
Change to a supported file.
Change to a supported file.
content
Wrong file
Video
resolution not
supported
The video resolutionexceeds
720X576.
Region Error
DVD is not compatible with
region code of unit.
Use discs with corresponding regional
code.
Error Illegal mechanism operation.
Press EJECT key for 5 seconds to reset
loading mechanism.
AMP ERROR
Unit fails to operate or speaker
connection is incorrect;
protective circuit is activated.
Check the speaker connection. If the
message fails to disappear even after the
engine is switched off/on, contact your
dealer or an authorized Pioneer Service
Station for assistance.