Save six (6) sorts of file for Version Up (build.img, UPD_MPEG.VER, update.img, UPD_MCU.VER, UPD_BT.VER and
NFOREBT.dfu) on an USB.
Turn the product power to be ON and insert the above mentioned USB.
1. MPEG software update
2. MCU software update
3. BT software update (Only a model with BT functional)
4. Reset, "do default setting" in the setting menu.
5. Check Version
Insertion of USB will display the following Update screen.
UW model
Method of individual upgrading
Prepare files shown below according to the purpose for upgrading the software. (It is not necessary to prepare all files)
Item to upgrade Use software
MPEG build.img , UPD_MPEG.VER
MCU update.img , UPD_MCU.VER
BT NFOREBT.dfu , UPD_BT.VER
Upgrade the software in the order of MPEG, MCU, and BT.
Please be sure to perform Default Settings in the Setting after performing Version Up.
If you do not perform the Version Up, the initialization of MPEG software will not be executed.
In addition, the Main Body Reset SW located at the rear surface of Detach Panel is only for the Restart RESET
of MCU and it does not mean to perform all of the initializations.
(Language Setting: Russian for UW5 model)
BR model
(Language Setting: Portuguese(B) for BR model)
To Next Page
Loading...
Need help?
General
