Pioneer PD-50AE User Manual

> Before Start > Part Names > Install > Playback
Advanced Setup | Others
14
Using this unit as a D/A converter
a
2
1
You can convert the digital audio of the PC to analog on this
unit, and then output it from the ANALOG OUT jacks.
Switching the source
1. Press SOURCE of this unit or the remote controller to
switch the source of the unit to "USB DAC".
Connections
2. Use an A-B type USB cable to connect a computer.
Playback
3. Start play on the player.
• The digital signals that can be input by this unit are linear
PCM signals with a sampling frequency and quantization
bit rate of 48 kHz/32 bit (operation may not be possible
with all connected devices or environments).
• Supported OSs of PC to be connected are Windows10
®
and Mac OS X.
• With OSs other than the supported ones, the sound may
be interrupted or may not come out.
• Depending on the usage environment, playback may not
be performed normally.
USB DAC
a USB Cable

Pioneer PD-50AE Specifications

Analog Audio Output

RCA OUT Rated Output Level	2.3 Vrms (1 kHz, 0 dB)
RCA OUT Impedance	100 Ω

Frequency and Noise

Frequency Response for CD	2 Hz - 20 kHz
Frequency Response for SACD	2 Hz - 50 kHz (-3 dB)
Signal to Noise Ratio for CD	116 dB or more (A-weighting)
Signal to Noise Ratio for SACD	116 dB or more (A-weighting)
THD+N for CD	0.002 % or less
THD+N for SACD	0.002 % or less

Digital Audio Output

Coaxial Digital Output Voltage	0.5 Vp-p
Coaxial Digital Output Impedance	75 Ω
Optical Digital Output Power	-14 - -21 dBm
Optical Digital Output Wavelength	660 nm

General

Power Supply	AC 220 - 230 V, 50/60 Hz
Power Consumption	43 W
Power Consumption in Standby	0.3 W
Dimensions	435 mm  138 mm  413 mm
Weight	13.1 kg