SDA (ABT)
COMP_DET
Check the line and IC1308,
RESET (63_H). If IC1311
is failure, replace IC1311.
No
Turn the power off and insert
the wire securely.
No
No
Check the line and IC1308,
RESET (63_H). If IC1311
is failure, replace IC1311.
No
Check the line and IC1308,
RESET (51_H). If IC1302
is failure, replace IC1302.
No
Ye s
IC1311 (pin 61)
Does a signal output
in constant period
(0 to 3.3 V)?
Ye s
Does a signal output
in constant period
(0 to 3.3 V)?
Does a signal output
in constant period
(0 to 3.3 V)?
SCL (ABT)
IC1311 (pin 62)
SDA (DECODER)
IC1302 (pin 53)
Ye s
SCL (DECODER)
TMDS OUTPUT
IC1302 (pin 54)
Check the line and IC1308,
RESET (51_H). If IC707 is
failure, replace IC1302.
No
Does a signal output
in constant period
(0 to 3.3 V)?
Ye s
C
To Step 8
Ye s
To Step 9
Ye s
Yes (3.3 V)
CN1304
IC1316 (pin 55)
IC1302 (pins 36, 47, 48, 49, 50)
Are the connectors
securely inserted?
Does a signal output
in constant period
(WAVE)?
Check the line and IC1316.
If IC1316 is failure, replace
IC1316.
Check the line and IC1302.
If IC1302 is failure, replace
IC1302.
IC1302 (pin 36 (CVBS), 47 (CR),
48 (CB), 49 (Y), 50 (SOY))
No
(0 V)
Does a signal output
in constant period
(0 to 3.3 V)?
Step 8: ANALOG UP
Check the IC1308 or IC1303.
If IC1308 or IC1303 is failure,
replace IC1308 or IC1303.
No
Ye s
IC1308 (pins 30,31,33,34,36,37,39,40)
Are there signals
(approx. 0.5 Vp-p)
IN all lines?
Step 9: TMDS
End