Step 0: Preliminary confirmation
Confirm the following items before checking
To Step 1
Do screws of USB Assy
securely tighten?
Ye s
[4] iPod TROUBLESHOOTING
Tighten screws securely.
No
OK
Step 1: Power supply
CN801 (pins1, 2)
IC806 (pin 2)
Is the voltage 12 V?
Is the voltage 5 V output?
Is pin 6 (en) of IC806 high?
Is the voltage of 5V input?
Is the voltage 3.3 V output?
Is the voltage of 12 V input?
Ye s
Ye s
Check the wire between USB and
MAIN Assys.
No
12 V input
12 V input
IC806 (pins 7, 8)
Ye s
REG2 (pin 3)
Ye s
Check the IC806 and its peripheral
circuits.
No
No
Is REG2 abnomally hot?
No No
(to chassis)
(to chassis)
REG2 (pin 2)
Ye s
Ye s
Ye s
3.3 V output
Check the pattern in the path.
No
The output and GND may be
short-circuited. Check the path
between them.
Check the IC806 and its peripheral
circuits. (CP803 pin 5)
No
Check the MAIN Assy.
OK
Replace IC806.
OK
Replace IC806.
Replace REG2.
D