SURROUND
SURROUND
17
<ARB7146>
3
SURROUND
Setting the Delay Time
As the SURROUND speaker is normally placed near the listening position, it is nearer to the listening position than the
FRONT speaker. Subsequently, since the sounds from the SURROUND speaker will be heard quicker than those from the
FRONT speaker, set the delay time for the sounds from the SURROUND speaker so that the SURROUND and FRONT
speakers are virtually the same distance from the listening position.
(Set about 1 to 1.5 m for each step.)
1.
1.
2.
2.
Select DOLBY PRO
LOGIC.
Set the delay time.
AV MULTI-CHANNEL RECEIVER
REMOTE CONTROL UNIT
DIRECTFUNC.
VIRTUAL
RECEIVER
STANDBY/ON
TV
CONTROL
LD
DVD
TUNER MPX
STANDBY/ON
CLASS
D.ACCESS
TAPE
TV FUNC.
BAND
CD
SOURCE
SELECT
LOUD.
PRO LOGIC
SURROUND
DSP MODE
TV VOL.
FREQ.
0
789
456
123
MUTING
MASTER
VOLUME
Î
CENTER
LEVEL
CENTER
MODE
DELAY
TIME
TEST
TONE
REAR
LEVEL
CHANNEL
STATION
CD DISC
EFFECT
memo
¶ First set to 20 ms.
¶ Initially the distance from the listening position to the SURROUND speaker will
be set shorter than that from to the FRONT speaker.
¶ The delay time is valid during DOLBY PRO LOGIC.
¶ When 3CH LOGIC is selected in the center mode, the delay time cannot be set.
PRO LOGIC
SURROUND
DELAY
TIME
0
SP
A PRO LOGIC
1
1
3
15 ms
3
2
2
20 ms
25 ms
30 ms
SP
A PRO LOGIC
2
2