30
FEATURES
Backrest
The backrest can be adjusted for rider comfort. Whenever making
adjustments, always make sure all lock levers are securely locked before
operating.
Tip: If an adjustment is difficult, rotate the lock levers counter-clockwise to
relieve tension, then make the adjustment. Always tighten the levers after
adjusting.
Height Adjustment
1. Lift the upper lock levers (A)
on both backrest supports to
release the locks.
2. Raise or lower the backrest to
the desired position.
3. Push the lock levers inward to
secure the locks. Rotate
levers clockwise to tighten.
Angle Adjustment
1. Lift the lock lever at the center of the backrest (B).
2. Tilt the backrest forward or rearward to the desired position.
3. Push the lock lever inward to secure the lock.
Operator/Passenger Conversion
1. Lift the lower lock levers (C) on both backrest supports to release
the locks.
2. Move the backrest forward for operator use or rearward for
passenger use.
3. Push the lock levers inward to secure the locks. Rotate levers clock-
wise to tighten.
Adjustable Headlights
Move the headlight adjuster to raise or
lower the headlight beam.
• Move the adjuster to the left to lower
the beam.
• Move the adjuster to the right to raise
the beam.
To Next Page
Loading...
Need help?
General
