EasyManuals Logo
Home>Polaris>Offroad Vehicle>600 IQ Widetrak

Polaris 600 IQ Widetrak User Manual

Polaris 600 IQ Widetrak
139 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #84 background imageLoading...
Page #84 background image
82
MAINTENANCE
Spark Plugs
A new engine can cause temporary spark plug fouling due to the preser-
vative added during the assembly process. Avoid prolonged idle speeds,
which cause plug fouling and carbonization.
NOTICE: Using non-recommended spark plugs can result in serious engine
damage. A spark plug with a heat range too high will always cause
engine damage if the engine is operated in conditions more severe
than intended for that plug. Always use the spark plugs recommended
for your snowmobile.
Use recommended spark plugs with the proper gap. Refer to the spec-
ifications section beginning on page 114.
Use only resistor-type spark plugs.
Torque spark plugs to 18-20 ft. lbs. (24-27 Nm).
Check the spark plug firing end condition after the engine has been
warmed up and the vehicle has been driven at higher speeds. If a plug is
fouled, replace the plug with a new plug.
CAUTION! A hot exhaust system and engine can cause burns. Wear
protective gloves when removing a spark plug for inspection.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris 600 IQ Widetrak and is the answer not in the manual?

Polaris 600 IQ Widetrak Specifications

General IconGeneral
BrandPolaris
Model600 IQ Widetrak
CategoryOffroad Vehicle
LanguageEnglish

Related product manuals