EasyManuals Logo
Home>Polaris>Offroad Vehicle>600 IQ Widetrak

Polaris 600 IQ Widetrak User Manual

Polaris 600 IQ Widetrak
139 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #87 background imageLoading...
Page #87 background image
85
MAINTENANCE
Oil Lines
Inspect oil line condition every 1000 miles (1600 km).
Oil Filter
The oil filter is located at the side of the
oil tank. Have your dealer change the oil
filter and bleed the system annually or
every 1000 miles (1600 km). Have your
dealer inspect the return check valve as
well.
Tip: The direction of the arrows indicates the
direction of flow through the filter.
Exhaust System
Check the exhaust system for wear or damage at the intervals outlined in
the Periodic Maintenance Table beginning on page 76.
CAUTION! Hot exhaust system parts can cause burns. Allow adequate time for
the exhaust system to cool. Never perform this procedure with the engine
running.
1. Allow the engine and exhaust system to cool completely.
2. Open the hood.
3. Inspect the muffler and pipes for cracks or damage. Check for weak
or missing retaining springs or damper/support grommets.
4. Replace any damaged or missing components.
5. Clean the plastic surfaces next to the muffler with aerosol Carbure-
tor and Throttle Body Cleaner. See page 116 for the part numbers of
POLARIS products.
6. Close the hood.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris 600 IQ Widetrak and is the answer not in the manual?

Polaris 600 IQ Widetrak Specifications

General IconGeneral
BrandPolaris
Model600 IQ Widetrak
CategoryOffroad Vehicle
LanguageEnglish

Related product manuals