38
FEATURES
Instrumentation
MFD Digital Display Programs
Press and release the MODE button to cycle through the three MFD pro-
grams: Performance, Engine and History. Each program remains active
until you cycle to the next program. While any program is active, press
and release the SET button to cycle through the program’s screens.
Performance Program
Press and release the MODE button until the performance program
screen is active. The default display for this screen includes electrical
system voltage (unless equipped with ACE suspension adjustment), fuel
level (if equipped) and either speed or tachometer, whichever is
selected. See page 37.
Press and release the SET button to cycle through the following screens:
odometer, trip 1 odometer, trip 2 odometer, fuel trip odometer (if fuel is
low) and clock (if equipped). Use the following procedures to make
changes to these screens.
Odometer Setting
The odometer records the vehicle's total
distance traveled since manufacture. The
odometer cannot be reset.
Trip Settings
Trip 1 and Trip 2 are odometers used
to check fuel mileage or to keep
track of distance traveled. Both
odometers can be reset to zero.
1. Enter the Performance Program.
2. Press and release the SET button
until the desired trip screen is
active.
3. Press and hold the SET button for two seconds to reset the trip
odometer to zero.
4. Press and release the SET button to cycle through additional
screens.
To Next Page
Loading...
Need help?
General
