42
THE PERFECT FIT
PRO X Rear Suspension Adjustments
Weight Transfer During Acceleration
PRO X Rear Rear Scissor Stop (RRSS)
The preferred method for controlling weight
transfer during acceleration of the PRO X rear
suspension is by adjusting the RRSS. Use the
scissor stop t ool (1) located in your tool kit to
make the adjustments.
To decrease weight transfer under acceleration
(for improved cornering), rotate the RRSS to
a higher position.
To increase weight transfer or ski lift during acceleration, move the
RRSS to the rearward upper position. The RRSS may also be rotated t o
a lower position for even more weight transfer if desired.
A - Low Position - This setting will increase weight transfer.
B - Medium Position - This setting is the production setting and will
provide the best overall trail riding.
C - High Position - This setting will decrease weight transfer.
D - Rearward Upper Position (optional hole location) - This setting
will increase weight transfer.
NOTE: Your dealer can help you with initial set-up and additional
set-up instructions to help you achieve an optimum ride.
1
A
B
D
C
To Next Page
Loading...
Need help?
General
