37
FEATURES
MFD Digital Display Prog rams
Engine Program
Hour Meter
The hour meter records the total hours of
engine operation since manufacture. This
meter cannot be reset.
Engine Temperature
A thermometer measures water temperature,
giving an indication of engine temperature.
History Program
The History Program automatically displays
electrical system voltage level and fuel level.
While in the History mode, press the SET button to view m aximum
vehicl e speed, m aximum engine rpm or the current service i nterval
setting. The gauge automatic ally logs the maximum speed and engine
rpm even if the History Program is not curre ntly displayed.
The History Program will display the history of the Maximum Speed,
Maximum RPM and Service Interval settings.
Maximum Speed/RPM Reset
While in either the MAX MPH or the
MAX RPM mode, press and hold t he SET
button for three seconds to reset the
recorded maximum values for both MPH
and RPM. Both of these values are reset
at the same time. Reset the MAX
MPH/RPM values before each run to
obtain accurate readings.
NOTE: Due to electrical noise, the MFD
may occasionally display MAX
MPH/RPM values that are not
representative of actual values.
To Next Page
Loading...
Need help?
General
