Polaris Alpha User Manual

51
A-3 NTRIP Server/Caster Setup for Users With Fixed IP
Since the newest version RTKLIB v.2.4.3 provided on official website is in source code format and
compilation required Borland™ C++ builder, a pre-compiled binary executable is made available at:
https://www.polaris-gnss.com/strsvr.zip. After downloading, unzip it, “strsvr 2.4.3.exe” can be
executed directly.
After executing binary, the main STRSVR dialog screen should appear as shown in below
Figure A-3-1
1. Set up an input stream of type "Serial" and press the "Opt" button to set the input stream
options.
Figure A-3-2
2. Configure the input stream options as follows. Press the OK button to return to the STRSVR dialog
when finished.

Polaris Alpha Specifications

General

Brand	Polaris
Model	Alpha
Category	Receiver
Language	English