BODY 7 - 14
MUDGUARD
DESCRIPTION
The mudguards are color keyed to match the hood.
They are attached to the body side panel to form
the trailing portion of the front fenders.
Fig. 8 Mudguard (Typical)
1 - Mud Guard LH
REMOVAL
1. Remove the 4 bolts and speed nuts attaching
the mudguard to body side panel.
2. Remove the mudguard.
INSTALLATION
1. If installing a new mudguard, drill four 1/4"
holes through mudguard, if necessary. (Use old
mudguard to determine hole locations).
2. With hood closed, position mudguard against
body side panel so that the mudguard forms a
clean line and fit with the fender portion of the
hood assembly.
3. Install the mudguard and install the four bolts
and speed nuts.
November 2007 GEM Service Manual
To Next Page
Loading...
Need help?
General
