WARNING
• To reduce the risk of injury, do not permit children to operate this product.
• Do not let anyone, especially small children, sit, step, lean, or climb on any equipment installed as
part of your pool’s operational system.
SAVE THESE INSTRUCTIONS
WARNING
• Make sure the plug is easily accessible at all times.
• Only connect the Control Box to a power outlet protected by a 30 mA maximum ground fault circuit
interrupter (GFCI). If in doubt contact a qualified electrician.
• To reduce the risk of electrical shock, do not use the cleaner or Control Box if the cord is worn or
damaged. Contact your local Polaris
®
dealer immediately for a replacement cord.
• Double insulation—For continued protection against possible electric shock, use only identical replacement
parts when servicing. Do not attempt repair of the cleaner, Control Box, power cord, or Floating Cable. All
repairs should be made by an experienced service professional using only Polaris OEM parts.
• NEVER OPEN Control Box. NEVER OPEN THE MOTOR BLOCK.
• The Control Box must not be installed in a floodable area.
• Do not use an extension cord to connect the unit to electric supply; provide a properly located outlet.
The Control Box should be placed near the outlet box.
OVERVIEW
1.1 Diagnostic Kit Components ........................... 3
1.2 Optional Test Cable for
91 Series Cleaners ........................................ 4
1.3 Required for Testing ...................................... 4
1.4 Testing Strategy ............................................. 4
1.5 Diagnostic Box Display Panel ........................ 5
1.6 Control Box Diagnostic Test Status
and Diagnostic Messages ............................. 5
1.7 Cleaner / Motor Block Diagnostic Tests
Status and Diagnostic Messages .................. 6
93 94 95 SERIES
2.0 Test for 9300 / P93 / 9300xi / 9350 / P935
(93 Series) 9400 / P94 / 9450 / P945 (94 Series)
9550 / P955 (95 Series) ................................. 7
2.1 Perform Control Box Test .............................. 7
2.2 Perform Cleaner Test ..................................... 7
2.3 Perform Test for Defective Motor Block ......... 8
2.4 93 94 95 Series Control Box Test .................. 10
2.5 93 94 95 Series Cleaner Test ........................ 11
2.6 93 94 95 Series Motor Block Test .................. 12
P825
3.0 Test for P825 Cleaner .................................... 13
3.1 Perform Control Box Test .............................. 13
3.2 Perform Cleaner Test ..................................... 13
3.3 Perform Test for Defective
Motor Block .................................................... 14
3.4 P825 Control Box Test ................................... 17
3.5 P825 Cleaner Test ......................................... 18
3.6 P825 Motor Block Test ................................... 19
91 SERIES
4.0 Test for 9100 / P91 Cleaner ........................... 21
4.1 Perform Cleaner Test ..................................... 21
4.2 Perform Test for Defective
Motor Block or Floating Cable ....................... 21
4.3 91 Series Cleaner Test .................................. 23
To Next Page
Loading...
Need help?
General
