22
FEATURES AND CONTROLS
Switches and Levers
Main Key Switch
Turn the main switch to the OFF position to stop the engine and
end all electrical power to the vehicle.
The main key switch must be in the ON position before starting
the engine. The headlights are not on in this position.
Move the key switch to the LIGHTS ON position to turn the
headlight on.
WARNING! Do not attach a large key fob or key ring to the main switch. It may
contact the gas tank cap when turning, causing an interruption to the electrical
system and an unexpected engine shut-down during operation.
Start Switch
Press the start switch toward the handlebar to engage the starter.
Tip: The starter will not engage unless the rear brakes are applied. See page 32
for engine starting procedures.
To Next Page
Loading...
Need help?
General
