EasyManuals Logo
Home>Polaris>Offroad Vehicle>Phoenix 200 Quadricycle

Polaris Phoenix 200 Quadricycle User Manual

Polaris Phoenix 200 Quadricycle
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #88 background imageLoading...
Page #88 background image
86
SPECIFICATIONS
Phoenix 200 Quadricycle
Maximum Weight Capacity 129 kg
Dry Weight 179 kg
Fuel Capacity 9.5 liters
Engine Oil Capacity 1200 ml
Transmission Oil 550 ml
Rear Gearcase Oil 120 m
Rear Rack Capacity 31.7 kg
Hitch Tongue Weight Capacity 13.6 kg (rear rack weight and tongue weight not
to exceed 13.6 kg)
Hitch Towing Weight Capacity 136 kg
Overall Length 165 cm
Overall Width 106.7 cm
Overall Height 106.7 cm
Seat Height 81.3 cm
Wheelbase 114.3 cm
Ground Clearance 14.5 cm
Minimum Turning Radius 165 cm unloaded
Engine Type 4-Cycle, Single Cylinder
Lubrication Wet sump
Engine Cooling Air
Displacement 196 cc
Bore x Stroke 65 x 59
Alternator Output 210w @5000 rpm
Compression Ratio 9.2:1 Full Stroke
Carburetor 1 / 22 mm (VM Type)
Pilot Jet 38
Main Jet 100
Air Screw 1 Turn Out
Jet Needle 2MKNN-4 clip
Ignition System DC CDI
Ignition Timing 32° +/- 2° @ 3000 RPM
Spark Plug / Gap NGK CR7HSA / 0.6-0.7 mm
Driving System Type Constant Variable Transmission (CVT)
Shift Type Side Lever (F/N/R)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris Phoenix 200 Quadricycle and is the answer not in the manual?

Polaris Phoenix 200 Quadricycle Specifications

General IconGeneral
BrandPolaris
ModelPhoenix 200 Quadricycle
CategoryOffroad Vehicle
LanguageEnglish

Related product manuals