92
MAINTENANCE AND LUBRICATION
Lights
Indicator Lamp Repla cement
1. Lift the hood.
2. Reach in behind the console
panel and lift the release (1) to
unplug the light from the
harnes s .
3. Using a flathead screwdriver,
press on the tab (2) on the to p
of the light to remove th e
indicator l ight assembly from
the console panel.
4. Using a screwdriver, turn the
light that needs to be replaced
1/4 turn counterclockwise.
5. Grip the l ight with a needle nos e pli er and remove th e li ght from
the assembly.
6. Install the new light and use a small flat head s crewdriver to seat it
into place, 1/4 turn clockwise.
7. Snap the assembly back into the console panel and reconnect the
harnes s .
8. Close the hood.
Tool Kit
To help y ou perform routin e maintenance, a tool k it is provided with
your vehicle. Items included in the ki t are:
S A screwdriver
S An open-end wrench (8-10 mm)
S An open-end wrench (12-14 mm)
S A tire pressure gauge
S A spark plug wrench and handle
S A spanner wrench (for shock adjustment)
NOTE: Additional tools will be necessary to perform routine
maintenance.
1
2
To Next Page
Loading...
Need help?
General
