22
FEATURES AND CONTROLS
Console
Cab Heater (if equipped)
To operate the cab heater, rotate the fan
control to the desired fan speed setting. The
far left setting turns the fan off.
Adjust the temperature by rotating the
temperature control to the desired heat
setting. Rotate the control clockwise to
increase heat or counter-clockwise to
decrease heat.
Seat Heaters (if equipped)
The seat heater switches are located on the
lower center control panel. Press and release
a switch to cycle through the available heat
settings:
•Low
•Medium
•High
•Off
The seat heater wiring is located under the driver’s seat.
To Next Page
Loading...
Need help?
General
