53
OPERATION
All Wheel Drive (AWD)
Locking the Differential
NOTICE: Damage to the differential can occur if it is
engaged while the vehicle is traveling at high
speeds or while the rear wheels are spinning.
Slow the vehicle to nearly stopped before
engaging the differential.
Locking the differential in slippery or low traction
conditions helps improve traction. Move the
rocker switch to the center position (2WD) to lock
the differential and operate in rear wheel drive.
Press the bottom of the switch to unlock the differ-
ential and allow the rear drive wheels to operate
independently. This mode of operation is well
suited to turf driving or whenever aggressive trac-
tion is not required.
To Next Page
Loading...
Need help?
General
