Polaris rzr 800 2008 User Manual

6.23
CLUTCHING
6
Clutch Assembly
1. Install a new bearing onto the output shaft using a press.
2. Install the shaft/bearing into the outer sheave.
3. Install the small and large retaining rings into the outer
sheave above the bearing.
4. Line up the “X” on the moveable sheave with the “X” on
the stationary sheave or use the marks previously used. Put
the sheaves together.
5. Install the roller (A) onto the roller pin (B) on both sides.
Align X’s
A
B

Polaris rzr 800 2008 Specifications

General

Brand	Polaris
Model	rzr 800 2008
Category	Utility Vehicle
Language	English