EasyManuals Logo
Home>Polaris>Offroad Vehicle>Sprotsman MV7

Polaris Sprotsman MV7 User Manual

Polaris Sprotsman MV7
131 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
36
CONTROLS
Master Cylinder
The brake fluid in the master
cylinder (1), which is located on the
left handlebar, should be checked
before each ride. The fluid level
can be seen through an indicator
window (2) on the top of t he master
cylinder. This eye will appear dark
when the fluid level is full. When
fluid needs to be added, the eye will be clear.
NOTE: When checking the fluid level, the ATV must be on level
ground with the handlebars straight. If the fluid level is low
add DOT 3 brake fluid only. See page 114 for the part
numbers of Polaris products.
WARNING
After opening a bottle of brake fluid, always discard any unused
portion. Never store or use a partial bottle. Brake fluid is
hygroscopic, meaning it rapidly absorbs moisture from the air.
The moisture causes the boiling temperature of the brake fluid to
drop, which can lead to early brake fade and the possibility of
accident or severe injury.
1
2

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris Sprotsman MV7 and is the answer not in the manual?

Polaris Sprotsman MV7 Specifications

General IconGeneral
BrandPolaris
ModelSprotsman MV7
CategoryOffroad Vehicle
LanguageEnglish

Related product manuals