85
MAINTENANCE AND LUBRICATION
Brakes
2. Check the brake system for fluid leaks.
3. Check the brakes for excessive travel or
spongy feel.
4. Check the friction pads for wear,
damage and looseness.
5. Check the security and surface
condition of the disc.
NOTE: Pads should be changed
when worn to 3/64″ (.1 cm).
Auxiliary Brake
The auxiliary brake s ystem is i ntended to be used as a backup for the
main brake system. S hould the main system fail, the rear brake can be
activated by depressing the foot pedal on the inside of the right
footrest. The hydraulic auxiliary brake system requires no adjustment.
NOTE: Since this is a rear brake only, it will not be as effective as
the all-wheel single lever system.
3/64″ (.1 cm)
To Next Page
Loading...
Need help?
General
