9 Using the Camera as a Web Cam (PC only)
• Setting up NetMeeting
NOTE:
Set the camera to Capture mode before starting NetMeeting™.
1. Turn on your camera and make sure the camera is in Capture mode.
2. Connect your PDC 2050 to the USB cable on one end.
3. Connect the other end of the USB cable to a USB port on your PC.
4. Put your PDC 2050 on top of your PC monitor or another at surface.
5. Connect your Microphone (not included) and speakers (not included) to
your audio card’s Mic in and line out jack respectively.
• Start NetMeeting
NOTE:
For Windows® XP / 2000 users who use NetMeeting for the rst time, Go to
Start -> Run ->type in “conf” ->click “OK” and then follow the on-screen set
up instruction to set up NetMeeting.
1. Double click the “NetMeeting” icon on the desktop or select the
“NetMeeting” icon from the Windows® Start Menu.
2. If you need further help on how to use Microsoft® NetMeeting™, select
the “Help” under the menu bar and choose the topic you need. You
can also refer to the Polaroid “EASY TO USE GUIDE TO MICROSOFT®
NETMEETING™” or visit the website: http://www.microsoft.com/
windows/netmeeting.
To Next Page
Loading...
Need help?
General
