• Installing the Batteries
Alkaline batteries are supplied with the product. For more guidelines on
battery usage, please see Using your batteries on page 43.
1. To open the battery door, slide the button in the direction shown.
2. Insert the batteries as shown, ensuring you follow the +/- signs
correctly.
3. Close the battery door and slide the button back into place.
• Turning the Camera On and Off
To turn on the camera, fully press and hold the
Power button until the Status LED turns green.
Press and hold the Power button again, “Good
Bye” will show on the LCD screen and the
camera will be off.
Power button
• Checking the Battery Level
Check the battery power level before taking pictures.
1. Turn on the camera.
2. Check the power level status that appears on the
camera LCD screen.
Batteries have adequate power.
Batteries need to be replaced.
To Next Page
Loading...
Need help?
General
