System Maintenance
You can perform several functions to keep your G7500 and Studio X series system running properly.
Unlock System Settings
Some settings in the local interface are locked by default. You can unlock these settings with your G7500 and Studio X
series system’s local administrator credentials.
Task
1 Do one of the following:
• In a call, select Menu > More > Settings .
• Out of a call, select Menu > Settings .
2 Select a setting with a Lock .
3 Enter your local administrator credentials to unlock the setting.
Note: Settings lock again if you exit the Settings screen, restart the system, or power off the system.
Updating Software
You can update your G7500 and Studio X series system software a few different ways.
Use one of the following methods to update system software:
• Poly download server
• Custom server URL
• Microsoft Teams Device Management (Microsoft Teams Rooms only)
• Zoom Rooms Administrator Portal (Zoom Rooms only)
• Software package you obtain from the Poly Online Support Center and upload with a USB flash drive
• Provisioning service (for example, Poly Lens or Poly Clariti Manager)
Updating Paired Devices
When you update your system, you also update some of its paired devices (if those devices have a new version available).
Depending on your setup, these devices might include:
• Poly IP Table Microphone
• Poly IP Ceiling Microphone
• Poly Microphone IP Adapter
• Poly Bluetooth Remote Control (firmware)
• Poly TC8 device
• Poly EagleEye Cube USB camera
• Poly Studio E70 camera
• Poly Trio 8500, Trio 8800, or Trio C60 system
Updating a Paired Poly Trio
You can update a Poly Trio system that’s paired with your video system in various ways.
See the Poly Trio administrator documentation for information on updating the phone using the following methods.
Automatic Updates
Provision your phone with Poly UC Software. This method works when the phone is paired with the video system.
You can automatically update a paired Poly Trio system in the following ways:
110