Poly Voyager 5200 User Manual

Pair
Pair headset to base
Your system has a base and compatible Bluetooth headset.
Your headset comes pre-paired to the base. To pair again:
1. Press the headset Call button until you hear "pairing" and the headset LEDs
flash blue and red.
2. Put your base into pair mode by pressing and holding the Bluetooth pairing
button on the back of your base for 2 seconds until the display panel's
Bluetooth icon flashes blue and red.
Pairing is successful when you hear "pairing successful" and "base
connected" and the display panel's Bluetooth icon turns solid blue.
NOTE: Your headset can pair with up to 8 devices but only maintain 2
connections simultaneously; this includes the base.
Pair to mobile device
1. To put your headset in pair mode, press the Call button until you hear "pairing"
and the headset LEDs flash blue and red.
2. Activate Bluetooth on your phone and set it to search for new devices.
● iPhone Settings > Bluetooth > On*
● Android Settings > Bluetooth On > Scan for devices*
NOTE: *Menus may vary by device.
3. Select “PLT V5200 Series.”
Once successfully paired, you hear “pairing successful” and the headset
LEDs stop flashing.
NOTE: Your headset can pair with up to 8 devices but only maintain 2
connections simultaneously; this includes the base.
8
Chapter 3 Pair

Poly Voyager 5200 Specifications

General

Brand	Poly
Model	Voyager 5200
Category	Headsets
Language	English