Polycom CX300 R2 User Manual

Polycom CX300 R2 Desktop Phone User Guide
Polycom, Inc. 10
To change the volume button response rate setting:
1 Press the 5 key on the keypad during startup.
The Device Settings screen displays, as shown next.
2 Press 1 to continue to Device Settings, and press 1 again to continue.
3 Press 1 for Volume Button Settings.
The message “You can adjust the rate which volume will increase or decrease when holding down
the volume buttons” displays.
4 Press 1 to continue to the Volume Button Settings.
5 Select one of the following options for the volume press response rate:
 Slow (1)
 Standard (2)
 Fast (3)
The message “Use the <your choice of> volume button response rate? YES (1) Cancel (*)” displays.
6 Select 1 for Yes or * to Cancel.
After you press 1, the message “Volume button press response rate saved” displays.
7 Press * to exit to the main menu.
Set the Call Volume
You can set the volume for all calls to one of the following two levels:
● Default level Sets the volume to the standard level for the phone.
● Preserve level from last call Sets the volume to the level used in your last call.
To change the call volume settings:
1 Press the 5 key during startup.
2 Press 1 to continue to Device Settings, and press 1 again to continue.
3 Press 2 for more options, and press 1 for Volume Settings.
The message “You can restore volume to default, or preserve volume level from your last call”
displays.
4 Press 1 to continue to Volume Settings.
5 Choose one of the following options:
 Press 1 to preserve the level from previous call.
 Press 2 for default level.
A message showing your call volume setting displays.
6 Press * to exit to the main menu.

Polycom CX300 R2 Specifications

General

Brand	Polycom
Model	CX300 R2
Category	Telephone
Language	English