Polycom Visual Concert VSX Getting Started Guide

GETTING STARTED GUIDE FOR THE VSX SERIES
WWW.POLYCOM.COM/VIDEODOCUMENTATION
4
Calling and Answering
Answering a Video Call
When a call comes in, you hear a ringing sound, and you may see a message
that includes the number of the person calling. If the person is listed in the
directory, you’ll also see the person’s name.
The system administrator configures the system to answer incoming calls in
one of these ways:
 The system prompts you to answer the calls manually.
 The system answers incoming calls automatically.
To answer the call manually:
>> When the system notifies you that a call is coming in, select Answer or
press Call-Hang Up on the remote control.
To answer the call when your system is set up to automatically answer
calls:
>> The call connects automatically.
If you see Near on your screen, then your system is configured to automatically
mute near-end audio when a call comes in. To unmute your system, press Mute
on the remote control. For VSX 7000 and VSX 8000 systems, you can also press on
the microphone.
Placing a Video Call
You can use your system to place a video call in any of these ways:
 Entering a name or number
 Choosing from a list of recently-called sites
 Choosing a site from the Contacts or Speed Dial list on the Place a Call
screen, if your system has been configured to have one
 Using the directory

Polycom Visual Concert VSX Specifications

General

Brand	Polycom
Model	Visual Concert VSX
Category	Conference System
Language	English